once an ottoman, twice DIYed

Over three years ago, I redid our sadly chewed up Target storage ottoman with a slip cover. It was literally the only piece of furniture we bought after we got married. (sniff) Of course, the puppy chewed that one.

After using it daily, the cover needed a wash, so I did. But I'd forgotten that I didn't preshrink the fabric the first time around, so ... it shrunk. Ugh.

Oh well, we kept using it.

And then it got really, really dirty (think toddler, dog, husband, me...) and began to come apart in places and it was time for a change.

(problem) Not to mention, I was struggling with solutions for toy storage space ...  I had thought about an open coffee table with rolling crates underneath, a different coffee table and storage crates beside the couch, a vintage trunk, etc.

A couple of friends nixed the vintage trunk route because the lids are often very heavy and suggested a storage ottoman. Yes, well, I have a storage ottoman but it is being used to house photos and a few wedding memorabilia. And the slip cover is a pain and a half to get off/get on every time my toddler wants to get in it. It just wouldn't be good for toys.

*******

(solutions) A couple of weeks later, I thought, "Why not use it and just change it up? Isn't that what I've been talking about on my blog?!" So I scanned all of the old photos except for one album from my travels in Europe from 2006 and our wedding album. 360+ photos are gone from my life but still accessible on the computer. Decluttering is beautiful.

I made room in my linen closet for the wedding box.

And then I decided to rip the upholstery off the ottoman and slap some wood slats on the outside for a completely different look. Storage for toys that looks a lot better than it did. Away with thee, slipcover!!

Ladybug and I went to visit my parents over spring break, so I decided to shove the torn-apart ottoman in the back of the car and ask my dad to help me fix it up.

My idea: slap some wood on the outside, maybe sand and stain.

My Dad's idea: un-upholster the entire thing, take it completely apart, cut it down so the lid would fit with an extra 3/4" of wood added to the outside, put the box back together and then painstakingly fit each piece of wood to the outside.

Of course, we did it the right way.

Here goes!


First, we took all of the upholstery off (including all 1,000 staples) and took the entire box apart to hopefully reuse. Then we cut about 1-1/2" off each piece and used an electric nail gun to put it back together (yay!). We put the inside upholstery back in as we went.

Each board was cut at a 45 degree angle (LOTS of 45 degree angles, compound angles, too) to create an interesting pattern and then we glued and fitted pieces of free oak flooring - leftover from a kitchen flooring project - to cover the entire ottoman. This about tripled its weight. In a good way. 

After piecing it all together, it the edges weren't totally even, so we took the circular saw and evened out the top and bottom edges. While cutting the pieces, we were reminded to not cut pieces of wood that are too small. Right, Dad?

And here it is!! After I took it home, I sanded it, stained it with Dark Walnut and sealed it with three coats of polycrylic.

I had to make-do with the upholstery, so I covered up the lip with brown scraps and re-stapled the inside upholstery up. Final step was to screw the legs back in and install a length of chain since the lid mechanism didn't work with the new, smaller box size. I don't love seeing the staples, but it really isn't a big deal as the lid is closed most of the time.

And the toys are officially hidden from sight!

Finally, a satisfactory solution to my toy dilemma. It's a more masculine look than I usually go for, but I really like it. And it's still very comfy to prop up on and type a blog post (wink).

 With a 5x7 clearance jute rug from Target, I think it looks smashing!

Third time's a charm?

I sure hope so.