DIY rustic phone cabinet

8.01.2014

Kitchen update is complete!! (See previous posts here, here, here and here.)

My last project in the kitchen is complete. After several weeks of "in progress" because of my lack of a table saw, I finished my rustic phone cabinet.

This idea was the answer to a clutter problem.

Do you have a spot where stuff always seems to accumulate without a second thought? Ugh. Our microwave is a magnet for clutter and I hate looking at it. With our tiny kitchen layout, every time we need to move the dishwasher to hook it up to the sink, we have to move the phone off and on and off ...

So, I thought, why not build a small cupboard to house the phone, cover the ugly phone jack (see the pic below) and clear up some of the visible clutter?


I had a source for rustic 1x4s, so I figured they would work perfectly as the phone base is right around 4" wide. So when my Dad brought his miter saw to help with a couple of projects, I got several weathered boards, and we went to work.

Very quickly, I realized that said 1x4s were indeed NOT 1" or 4" wide. I should've known this, but wasn't thinking...

My dad did some math and said he would have to rip some boards length wise in order to make the depth of the cabinet wide enough to house the phone. But the table saw is at his house, so it would be a few weeks before I got to work on the cabinet again.


Once I obtained my newly cut pieces, I started putting them together.

I used all of the free items items I could:
3 - 1"x4" fence boards
2 old hinges and screws from this project
reused turquoise knob
1" finish nails and 1" wood screws that I had on hand


I purchased:
1 magnetic hinge kit
4-pack L-shaped brackets
2" screws and 1/2" screws (for attaching brackets)

= about $6-7

 Here is a view from the inside.

- I used the small pieces of wood (extra from the ripping job) to piece together the corners and then two of the longer extras to put the door slats together.
- The left set of L-brackets are screwed into studs and the other two are just screwed into the drywall for a little stabilization. I was going to put them in with plastic anchors, but ran into some sort of duct that made it impossible to screw anything into. (de ga je!)
- The door hinges and magnetic closure are pretty self explanatory. :-)

Aren't the weathered variations so pretty?




I know my dishwasher/microwave combo isn't much to look at, but the pic gives some perspective on the cabinet. Doesn't this little nook look so much cleaner?






I have to admit - even with this "fix" the microwave is still a magnet for stuff, but at least it's not home to those things anymore.

Woot for a finished room!

1 comment: